Sheets Bend Knot

A common bend for joining lines of different diameters. Also known as the one way sheet bend this knot can be useful when joining ropes that might be hauled over an object or edge.

File Double Sheet Bend Svg Wikimedia Commons

It can be pulled taut before securing.

Sheets bend knot. Sheet bend aka weavers knot tying instructions. A bend consisting of interlocking overhand knots. The addition of an extra turn round the bight prevents slipping in the case of extra smooth ropes.

A sheet bend is particularly useful for joining two ropes of different thicknesses together and is very secure. The sheet bend or weavers knot is recommended for joining two ropes of unequal size. The sheet bend also known as becket bend weavers knot and weavers hitch is a bend.

It owes the name weavers knot to its historical use in textile mills. It is quick and easy to tie and is considered so essential it is the first knot given in the ashley book of knots. The thicker rope must be used for the simple bight as shown.

For maximum strength the free ends should land up on the same side of the double sheet bend knot. Form a loop in the end of one rope. Pull all four ends to tighten.

However it works equally well if the ropes are of the same size. With this method of tying the working ends point the same way as the rope being hauled and are thus less likely to snag on an obstruction. The knot also known as becket bend weavers hitch or weavers knot though recommended for joining ropes of different diameters is equally effective for ropes of equal thicknesses as well.

The sheet bend can lend a helping hand. Two wraps around both parts of the first rope make a doubled sheet. It is practical for joining lines of different diameter or rigidity.

Advantage over the sheet bend knot. A multi strand bend used to join two ends of laid or twisted rope together. Pass the free end of the rope to be joined under the opening of the loop around both parts of the first rope.

A bend commonly employed in small stuff.

Seven Essential Knots For Sailors Sail Magazine